65 Degree Grease Fittings

Grease Fitting/Grease Nipple/Zerk Fittings used in mechanical systems to feed lubricants, usually lubricating grease under moderate to high pressure into a moving parts.

Product Construction

  • EN-1A steel/Stainless Steel/Brass
  • Heat Treated
  • Zinc Plated

Product Features

  • A metal fitting used in mechanical systems to feed lubricants, usually lubricating grease, under moderate to high pressure, into a bearing
  • Made from EN-1A steel/ 303 Stainless Steel/Brass and supplied as per requirement.
  • Quality compliance to ISO/TS-16949.
  • Case Hardened Head with a case depth of 0.005″ (0.13 mm) to 0.009″ (0.23 mm) only for extra durability and to protect them from wear due to constant use.
  • Ball check in the head prevents dirt and grit from getting into the fitting.
  • Heavier wall thickness for extra strength
  • Premium grade 3 Music Wire ensures accurate opening
  • Zinc Plated with Yellow Passivated finish with a plating thickness of 0.0002″ (5 microns) confirming to ASTM B117 specification & have a guaranteed salt spray life of over 72 hours to red rust. Fittings can be custom manufactured in white zinc & also be made with trivalent passivation for maximum protection against corrosion.
  • Fitting profile & dimensions are comply to SAE, DIN, BS, JIS & IS standards.


Ordering Details

Article No.

Order No.

Angle (A)


Effective Thread Length
Minimum (B)

Shank Length (C )

Overall Length (E)

Hex Size(D)

1/4″ – 28 SAE-LT – Taper Thread



 2.5 mm

 5.1 mm

 18.5 mm


1/8″ – 27 Pipe Threads PTF – Special Short



 5.6 mm

 7.6 mm

 21.8 mm


1/4″ – 18 Pipe Threads – Special Extra Short



 5.6 mm

 8.7 mm

 24.6 mm





error: Content is protected !!