Product Features
- Universal Surface Gauge is used for accurately scribing lines, transferring measurements or probing surfaces in inspection work
- A fully hardened and ground base which serves as an accurate reference surface
- A machined Vee groove in the base allows the gauge to be used conveniently on curved surfaces
- A Vee groove at the front end allows the spindle to adjust to any angle above or below the base allowing it to be used as a height gauge and also as a depth gauge
- Two retractable pins allow the gauge to be located against the edge of a surface plate or T-slot for linear work
- A 1/4″ (6.35 mm) hole in the spring loaded scriber holder allows a dial indicator to be attached conveniently making the gauge useful for checking flatness, parallelism, heights, depths etc.
- Grooves on the side of the base allow for comfortable grip>
- Well tapered scriber for better sighting while working. The scriber tip is hardened to 55-60 HRC
Ordering Details
Article No. |
Order No. |
Base Dimensions |
Spindle Length |
Scriber Length |
||||
Inch |
mm |
Inch |
mm |
Inch |
mm |
|||
SA/USG/4-7 |
110275 |
2-3/16 × 1-5/8 |
55×40 |
7″ With extra 4″ spindle |
175 mm with extra 100 mm spindle |
3 |
75 |
|
SA/USG/9-12 |
110276 |
3-1/8 × 2-1/2 |
80×63 |
12″ With extra 9″ spindle |
300 mm with extra 225 mm spindle |
7 |
175 |
|
SA/USG/12-18 |
110277 |
4 × 3-1/2 |
100×90 |
18″ With extra 12″ spindle |
450 mm with extra 300 mm spindle |
7-9/32 |
185 |
Applications
