Product Features
- Sash Bar Cramps are most commonly used for clamping large section workpieces during fabrication, gluing in joinery, carpentry and boat building. The bars are made of drawn steel with a section of 1.1/4″ x 1/4″ (32 mm x 6 mm). Malleable iron head and slides provide rigidity and strength even under heavy tension. Both head and slide have a flat bottom allowing the bar to stand upright without support. The head is fitted square to the bar with 1.1/2° – 2° taper for true parallel clamping action.
- A high grade steel mains crew with a wear resistant Acme thread, which applies pressure quickly and smoothly. Tail slides are easily adjusted and secured by a steel pin passing through one of the locating holes. Tail slide and heads are flat bottomed so that the clamp can stand upright without support.
- Throat Depth: 2″ (50 mm)
- Width of Clamp Face: 1.3/16″ (30 mm)
Ordering Details
Article No. |
Order No. |
Clamping Capacity |
Bar Length |
||
Inch |
mm |
Inch |
mm |
||
SA/SBC-1 |
130110 |
18 |
450 |
24 |
600 |
SA/SBC-2 |
130111 |
24 |
600 |
30 |
750 |
SA/SBC-3 |
130112 |
30 |
750 |
36 |
900 |
SA/SBC-4 |
130113 |
36 |
900 |
42 |
1050 |
SA/SBC-5 |
130114 |
42 |
1050 |
48 |
1200 |
SA/SBC-6 |
130115 |
48 |
1200 |
54 |
1350 |
Applications
