sendenquiry

Product Construction

  • EN-1A steel/Stainless Steel/Brass
  • Heat Treated/li>
  • Zinc Plated

Product Features

  • A metal fitting used in mechanical systems to feed lubricants, usually lubricating grease, under moderate to high pressure, into a bearing
  • Made from EN-1A steel/ 303 Stainless Steel/Brass and supplied as per requirement.
  • Quality compliance to ISO/TS-16949.
  • Case Hardened Head with a case depth of 0.005″ (0.13 mm) to 0.009″ (0.23 mm) only for extra durability and to protect them from wear due to constant use.
  • Ball check in the head prevents dirt and grit from getting into the fitting.
  • Heavier wall thickness for extra strength
  • Stress Relieved and Tempered Carbon Steel Spring.
  • Zinc Plated with Yellow Passivated finish with a plating thickness of 0.0002″ (5 microns) confirming to SAE J534 specification & have a guaranteed salt spray life of over 72 hours to red rust. Fittings can be custom manufactured in white zinc & also be made with trivalent passivation for maximum protection against corrosion.
  • Fitting profile & dimensions are comply to SAE, DIN, BS, JIS & IS standards.

grease-fitting

Ordering Details

Article No.

Order No.

Thread

Specifications

Effective Thread Length (B)

Shank Length (C )

Overall Length (A)

Hex Size (H)

SA/GF-PS/1

320089

1/8" BSPT

7.0 mm

8.0 mm

27.0 mm

10.0 mm

SA/GF-PS/2

320090

1/4" BSPT

10.0 mm

11.0 mm

30.0 mm

14.0 mm

SA/GF-PS/3

320091

1/8" NPT

7.0 mm

8.0 mm

27.0 mm

10.0 mm

SA/GF-PS/4

320092

1/4" NPT

10.0 mm

11.0 mm

30.0 mm

14.0 mm

Applications

application

Downloads


error: Content is protected !!