Product Construction
- Carbon Steel
- Hardened 60 – 63 HRC
Product Features
- This lathe dead center represents solid construction of carbon steel with Moving Parts and Fully Hardened.
- Half Dead Centers come with a full carbon steel construction or with Carbide tips
- Tip Hardened to 60-63 HRC And Included Angle At Tip is 60°
- Hardness complies with DIN 806 / ISO 298.
- This product is accurately ground and has a TIR of ± 0.0001″ (± 2.5 microns)
- Available in carbide tips brazed into the socket with a close tolerance for maximum strength
- Covers Widest Range Of Center Hole Sizes.
- In addition to Carbide tip centers are preferred in applications where the workpiece has a hardness close to or more than that of Carbon Steel Dead Centers
- Carbide tip imparts durability and calls for less downtime for regrinding of point
Ordering Details – Cobalt Steel
|
Article No. |
Order No. |
Morse Taper |
Length (L) |
Diameter (D) |
Height(H) |
|||
|
Inch |
mm |
Inch |
Mm |
Inch |
mm |
|||
|
Carbon Steel |
||||||||
|
SA/LDC-CS/80H |
120274 |
MT 1 |
3-5/32 |
80 |
31/64 |
12.2 |
55/64 |
22 |
|
SA/LDC-CS/100H |
120275 |
MT 2 |
4 |
100 |
45/64 |
18 |
1-3/16 |
30 |
|
SA/LDC-CS/125H |
120276 |
MT 3 |
5 |
125 |
31/32 |
24.1 |
1-1/2 |
38 |
|
SA/LDC-CS/160H |
120277 |
MT 4 |
6-19/64 |
160 |
1-1/4 |
31.6 |
2 |
50 |
|
SA/LDC-CS/200H |
120278 |
MT 5 |
8 |
200 |
1-49/64 |
44.7 |
2-31/64 |
63 |
Ordering Details – Carbide Tipped
|
Article No. |
Order No. |
Morse Taper |
Length (L) |
Diameter (D) |
Height(H) |
|||
|
Inch |
mm |
Inch |
mm |
Inch |
mm |
|||
|
Carbide Tipped |
||||||||
|
SA/LDC-CT/80H |
120279 |
MT 1 |
3-5/32 |
80 |
31/64 |
12.2 |
55/64 |
22 |
|
SA/LDC-CT/100H |
120280 |
MT 2 |
4 |
100 |
45/64 |
18 |
1-3/16 |
30 |
|
SA/LDC-CT/125H |
120281 |
MT 3 |
5 |
125 |
31/32 |
24.1 |
1-1/2 |
38 |
|
SA/LDC-CT/160H |
120282 |
MT 4 |
6-19/64 |
160 |
1-1/4 |
31.6 |
2 |
50 |
|
SA/LDC-CT/200H |
120283 |
MT 5 |
8 |
200 |
1-49/64 |
44.7 |
2-31/64 |
63 |
Applications
