Product Construction
- EN-1A steel/Stainless Steel/Brass
- Heat Treated
- Zinc Plated
Product Features
- A metal fitting used in mechanical systems to feed lubricants, usually lubricating grease, under moderate to high pressure, into a bearing
- Made from EN-1A steel/ 303 Stainless Steel/Brass and supplied as per requirement.
- Quality compliance to ISO/TS-16949.
- Case Hardened Head with a case depth of 0.005″ (0.13 mm) to 0.009″ (0.23 mm) only for extra durability and to protect them from wear due to constant use.
- Ball check in the head prevents dirt and grit from getting into the fitting.
- Heavier wall thickness for extra strength
- Stress Relieved and Tempered Carbon Steel Spring.
- Zinc Plated with Yellow Passivated finish with a plating thickness of 0.0002″ (5 microns) confirming to SAE J534 specification & have a guaranteed salt spray life of over 72 hours to red rust. Fittings can be custom manufactured in white zinc & also be made with trivalent passivation for maximum protection against corrosion.
- Fitting profile & dimensions are comply to SAE, DIN, BS, JIS & IS standards.
Ordering Details
|
Article No. |
Order No. |
Thread |
Specification |
||||
|
Effective Thread Length |
Shank Length |
Overall Length |
Diameter Size |
||||
|
mm |
Inch |
||||||
|
SA/GF-DS/1 |
320041 |
For 3/16" Drill |
N.A |
6.35 mm |
13.1 mm |
7.94 |
5/16" |
|
SA/GF-DS/2 |
320042 |
For 1/4" Drill |
N.A |
6.35 mm |
13.9 mm |
8.73 |
11/32" |
|
SA/GF-DS/3 |
320043 |
For 5/16" Drill |
N.A |
6.35 mm |
13.9 mm |
9.53 |
3/8" |
Applications
