sendenquiry

Product Construction

  • Aluminum
  • Bronze Filter
  • Steel
  • Acetal
  • Polycarbonate
  • Stainless Steel
  • Nitrile

Product Features

  • Space saver 2 piece Modular Filter-Regulator Combination & Lubricator.
  • Air Filter – Most commonly used to separate dust, dirt, moisture & other contaminants from compressed air effectively. Featured with Die Cast aluminum filter head, polycarbonate bowl with a steel bowl guard & high performance sintered Bronze filtering element.
  • Air Regulator – Keeping the Air Flow constant, the variation in the set Output Pressure, with reference to the changes in the Input Pressure defines the Pressure Regulation Characteristics of a Filter Pressure Regulator. Designed with a Non Raising “Press to Lock” adjusting knob for locking at any set pressure. These Regulators work on a Diaphragm operated, relieving type mechanism with pressure compensated by balanced poppet.
  • Pull the knob and adjust by turning the knob clockwise to increase the pressure. Push the knob back to its locked position. ( Turning the knob counter clockwise will reduce the pressure)
  • Air Lubricators – Lubricators are used to keep your airline and air tools properly lubricated all times to maintain peak performance. Featured with Die Cast Aluminum Head, polycarbonate bowl with a steel bowl guard. The head is fitted with Oil drop indicator, Oil drop controller & Oil filling plug
  • Designed for Modular & Vertical Mounting
  • Recommended oil grade ISO VG 32 (Servo System 32)
  • Filtration in 1, 5, 25 40, 50, 100 microns

24c pressure1

Note :- Supply pressure 100 PSI (7 BAR), Set pressure 85 PSI (6 BAR), Drop Pressure 14.5 PSI(1 BAR)

Series

Type

Max Flow Rate

Min Flow Rate

CFM

LPM

CFM

LPM

FRC13

Miniature

18

500

0.42

12

FRC14

Intermediate

63

1800

1.41

40

FRC15

Standard

99

2800

1.59

45

FRC17

 Heavy Duty

140

4000

1.76

50

Precautions

  • Note the direction of flow before installation and connect piping accordingly
  • Flush pipings for dirt, dust, rust and other foreign particles
  • Install in clean atmosphere
  • Nipples of taper threads to be used with Teflon tape. Ensure Teflon tape does not enter the unit during tightening. Nipples of straight threads to be used with sealing washer
  • Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons

Ordering Details – BSP Thread

Article No.

Order No.

Type

Thread

Port Size

Flow Rate

Port Size

Bowl Size (Filter)

Bowl Size (Lubricator)

Height

Width

Description

CFM

LPM

Oz.

ml

Oz.

ml

Inch

mm

Inch

mm

SA/FRCL13B

420105

Threaded type steel
bowl guard

BSP

1/4"

18

500

1/8"

0.3

9

0.68

20

6.69

170

5.75

146

  Miniature

SA/FRCL14B

420106

1/4"

53

1500

1/8"

1.08

32

1.93

57

8.66

220

7.17

182

  Intermediate

SA/FRCL1401B

420107

Bayonet type steel bowl guard,
Regulator with in-built
Venturi for Flow Compensation

3/8"

63

1800

1/8"

1.08

32

1.93

57

8.66

220

7.17

182

  Intermediate

SA/FRCL15B

420108

1/2"

99

2800

1/8"

1.5

44

5.17

152

11.02

280

8.66

220

  Standard

SA/FRCL17B

420109

3/4"

123

3500

1/4"

5.6

165

6.8

200

14.6

370

10.63

270

  Heavy Duty

SA/FRCL1701B

420110

1"

140

4000

1/4"

5.6

165

6.8

200

14.6

370

10.63

270

  Heavy Duty

Ordering Details – NPT Threads

Article No.

Order No.

Type

Thread

Port Size

Flow Rate

Port Size

Bowl Size (Filter)

Bowl Size (Lubricator)

Height

Width

Description

CFM

LPM

Oz.

ml

Oz.

ml

Inch

mm

Inch

mm

SA/FRCL13N

420111

Threaded type steel
bowl guard

NPT

1/4"

18

500

1/8"

0.3

9

0.68

20

6.69

170

5.75

146

  Miniature

SA/FRCL14N

420112

1/4"

53

1500

1/8"

1.08

32

1.93

57

8.66

220

7.17

182

  Intermediate

SA/FRCL1401N

420113

Bayonet type steel bowl guard, Regulator with in-built Venturi for Flow Compensation

3/8"

63

1800

1/8"

1.08

32

1.93

57

8.66

220

7.17

182

  Intermediate

SA/FRCL15N

420114

1/2"

99

2800

1/8"

1.5

44

5.17

152

11.02

280

8.66

220

  Standard

SA/FRCL17N

420115

3/4"

123

3500

1/4"

5.6

165

6.8

200

14.6

370

10.63

270

  Heavy Duty

SA/FRCL1701N

420116

1"

140

4000

1/4"

5.6

165

6.8

200

14.6

370

10.63

270

  Heavy Duty

Applications

application

Downloads


error: Content is protected !!