sendenquiry

Product Construction

  • Aluminum
  • Brass
  • Bronze Filter
  • Steel
  • Acetal
  • Polycarbonate
  • Stainless Steel
  • Nitrile

Product Features

  • Trio of Filter-Regulator-Lubricator is a 3 pc assembly is made of 3 individual components. Each component is attached in series using spacers & piping adapters, which makes the individual components easily removable / mountable without disturbing the pipe line.
  • Air Filter – Most commonly used to separate dust, dirt, moisture & other contaminants from compressed air effectively. Featured with Die Cast aluminum filter head, polycarbonate bowl with a steel bowl guard & high performance sintered Bronze filtering element. Metal Bowl Air Filters used where ambient air may contain chemicals, such as benzene, gasoline, kerosene, acetone, ethylene dichloride, carbon tetrachloride, toluene etc.
  • Air Regulator – Keeping the Air Flow constant, the variation in the set Output Pressure, with reference to the changes in the Input Pressure defines the Pressure Regulation Characteristics of a Filter Pressure Regulator. Designed with a Non Raising “Press to Lock” adjusting knob for locking at any set pressure. These Regulators work on a Diaphragm operated, relieving type mechanism with pressure compensated by balanced poppet.
  • Pull the knob and adjust by turning the knob clockwise to increase the pressure. Push the knob back to its locked position. ( Turning the knob counter clockwise will reduce the pressure )
  • Air Lubricators – Lubricators are used to keep your airline and air tools properly lubricated all times to maintain peak performance. Featured with Die Cast Aluminum Head, polycarbonate bowl with a steel bowl guard. The head is fitted with Oil drop indicator, Oil drop controller & Oil filling plug. All models are fog/mist type and have a fine adjustment of lubrication
  • Comes complete with wall mounting bracket
  • Designed for Modular & Vertical Mounting
  • Recommended oil grade ISO VG 32 (Servo System 32)
  • Filtration in 1, 5, 25 40, 50, 100 microns

24c pressure2

Note :- Supply pressure 100 PSI (7 BAR), Set pressure 85 PSI (6 BAR), Drop Pressure 14.5 PSI(1 BAR)

Series

Type

Max Flow Rate

Min Flow Rate

CFM

LPM

CFM

LPM

FRC13

Miniature

18

500

0.42

12

FRC14

Intermediate

71

2000

1.41

40

FRC15

Standard

106

3000

1.59

45

FRC17

 Heavy Duty

175

5000

1.76

50

Precautions

  • Note the direction of flow before installation and connect piping accordingly
  • Flush pipings for dirt, dust, rust and other foreign particles
  • Install in clean atmosphere
  • Nipples of taper threads to be used with Teflon tape. Ensure Teflon tape does not enter the unit during tightening. Nipples of straight threads to be used with sealing washer
  • Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene, kerosene or other aromatic hydrocarbons

Ordering Details – BSP Thread

Article No.

Order No.

Type

Thread

Port Size

Flow Rate

Port Size

Bowl Size (Filter)

Bowl Size (Lubricator)

Height

Width

Description

CFM

LPM

Oz.

ml

Oz.

ml

Inch

mm

Inch

mm

SA/FRL13B/MB

420079

BSP

1/4"

18

500

1/8"

0.3

9

0.68

20

6-11/16

170

7-7/8

200

  Miniature

SA/FRL14B/MB

420080

Regulator with in-built Venturi for Flow
Compensation

1/4"

46

1300

1/8"

2.15

64

3.38

100

10-7/16

265

9-27/32

250

  Intermediate

SA/FRL1401B/MB

420081

3/8"

71

2000

1/8"

2.15

64

3.38

100

10-7/16

265

9-27/32

250

  Intermediate

SA/FRL15B/MB

420082

1/2"

106

3000

1/8"

3

90

6.8

200

13

330

12

305

  Standard

SA/FRL17B/MB

420083

3/4"

123

3500

1/4"

5.6

165

6.8

200

14-9/16

370

14-9/16

370

  Heavy Duty

SA/FRL1701B/MB

420084

1"

175

5000

1/4"

5.6

165

6.8

200

14-9/16

370

14-9/16

370

  Heavy Duty

Ordering Details – NPT Threads

Article No.

Order No.

Type

Thread

Port Size

Flow Rate

Port Size

Bowl Size (Filter)

Bowl Size (Lubricator)

Height

Width

Description

CFM

LPM

Oz.

ml

Oz.

ml

Inch

mm

Inch

mm

SA/FRL13N/MB

420085

NPT

1/4"

18

500

1/8"

0.3

9

0.68

20

6-11/16

170

7-7/8

200

  Miniature

SA/FRL14N/MB

420086

Regulator with in-built Venturi for
Flow Compensation

1/4"

46

1300

1/8"

2.15

64

3.38

100

10-7/16

265

9-27/32

250

  Intermediate

SA/FRL1401N/MB

420087

3/8"

71

2000

1/8"

2.15

64

3.38

100

10-7/16

265

9-27/32

250

  Intermediate

SA/FRL15N/MB

420088

1/2"

106

3000

1/8"

3

90

6.8

200

13

330

12

305

  Standard

SA/FRL17N/MB

420089

3/4"

123

3500

1/4"

5.6

165

6.8

200

14-9/16

370

14-9/16

370

  Heavy Duty

SA/FRL1701N/MB

420090

1"

175

5000

1/4"

5.6

165

6.8

200

14-9/16

370

14-9/16

370

  Heavy Duty

Applications

application

Downloads


error: Content is protected !!