Product Construction
- Hardened Carbon Steel
- Auto Black & Ground Finish
Product Features
A centre punch is used to mark the center of a point. It is usually used to mark the centre of a hole when drilling holes. The sharp point of the Center Punch marks workpiece with a dimple, creating an exact starting spot for drill that prevents it from wandering. It works on just about any material softer than the point itself, including cast iron, mild steel, brass, bronze, copper, aluminum, wood, and even plastics and polymers.
The tapered shaft and sharp point are precisely machined to meet exacting size tolerances, ensuring they are straight and true. The punches have a knurled body for a good grip.
Manufactured from premium high carbon steel, each punch is individually heat treated creating a strong, hardened tip while keeping the soft temper of the striking end, allowing it to absorb hammer blows without chipping.
Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling
Supplied in individual sizes and also in sets with attractive vinyl pouch
Ordering Details
|
Article No. |
Order No. |
Point Size(S) |
Body Diameter |
Overall Length |
|||
|
Inch |
mm |
Inch |
mm |
Inch |
mm |
||
|
SA/CP-SH/1 |
260055 |
1/16 |
1.5 |
9/32 |
7 |
4 |
100 |
|
SA/CP-SH/2 |
260056 |
3/32 |
2.5 |
9/32 |
7 |
4 |
100 |
|
SA/CP-SH/3 |
260057 |
1/8 |
3 |
9/32 |
7 |
4 |
100 |
|
SA/CP-SH/4 |
260058 |
5/32 |
4 |
9/32 |
7 |
4 |
100 |
|
SA/CP-SH/5 |
260059 |
3/16 |
5 |
9/32 |
7 |
4 |
100 |
|
SA/CP-SH/6 |
260060 |
1/4 |
6 |
3/8 |
9.5 |
4 |
100 |
Ordering Details in Sets
|
Article No. |
Order No. |
Point Size(S) |
Body Diameter |
Overall Length |
Packaging |
|||
|
Inch |
mm |
Inch |
mm |
Inch |
mm |
|||
|
SA/CP-SH/5SET |
260061 |
1/16 |
1.5 |
9/32 |
7 |
4 |
100 |
Packed In Vinyl Pouch |
|
1/8 |
3 |
9/32 |
7 |
4 |
100 |
|||
|
5/32 |
4 |
9/32 |
7 |
4 |
100 |
|||
|
3/16 |
5 |
9/32 |
7 |
4 |
100 |
|||
|
¼ |
6 |
3/8 |
9.5 |
4 |
100 |
|||
Applications
