Product Construction
- Hardened Carbon Steel
- Auto Black & Ground Finish
Product Features
A centre punch is used to mark the center of a point. It is usually used to mark the centre of a hole when drilling holes. The sharp point of the Center Punch marks workpiece with a dimple, creating an exact starting spot for drill that prevents it from wandering. It works on just about any material softer than the point itself, including cast iron, mild steel, brass, bronze, copper, aluminum, wood, and even plastics and polymers.
Precisely machined sharp point to meet exacting size tolerances, ensuring they are straight and true.
Manufactured from premium high carbon steel, each punch is individually heat treated creating a strong, hardened tip while keeping the soft temper of the striking end, allowing it to absorb hammer blows without chipping.
Smooth-ground points heat-treated to stay sharp and true longer.
Hex stock fits more securely in a punch & chisel holder and also reduces the tendency to roll on work surfaces.
Supplied in individual sizes and also in sets with attractive vinyl pouch
Ordering Details
Article No. |
Order No. |
Point Size (S) |
Stock Size |
Overall Length |
|||
Inch |
mm |
Inch |
mm |
Inch |
mm |
||
SA/CP-HH/2 |
260032 |
5/64 |
2 |
1/4 |
6 |
3-1/2 |
90 |
SA/CP-HH/3 |
260033 |
8/64 |
3 |
5/16 |
8 |
4-1/4 |
108 |
SA/CP-HH/4 |
260034 |
5/32 |
4 |
3/8 |
10 |
5 |
125 |
SA/CP-HH/41 |
260035 |
5/32 |
4 |
5/16 |
8 |
5-1/2 |
138 |
SA/CP-HH/6 |
260036 |
¼ |
6 |
1/2 |
12 |
6 |
150 |
SA/CP-HH/61 |
260037 |
¼ |
6 |
3/8 |
10 |
6 |
150 |
SA/CP-HH/10 |
260038 |
3/8 |
10 |
5/8 |
16 |
6-1/4 |
160 |
Ordering Details in Sets
Article No. |
Order No. |
Point Size (S) |
Stock Size |
Overall Length |
Packaging |
|||
Inch |
mm |
Inch |
mm |
Inch |
mm |
|||
SA/CP-HH/5SET |
260039 |
5/64 |
2 |
1/4 |
6 |
3-1/2 |
90 |
Packed In Vinyl Pouch |
8/64 |
3 |
5/16 |
8 |
4-1/4 |
108 |
|||
5/32 |
4 |
3/8 |
10 |
5 |
125 |
|||
¼ |
6 |
3/8 |
10 |
6 |
150 |
|||
3/8 |
10 |
5/8 |
16 |
6-1/4 |
160 |
Applications
