sendenquiry

Product Construction

  • EN-1A steel/Stainless Steel/Brass
  • Heat Treated
  • Zinc Plated

Product Features

  • A metal fitting used in mechanical systems to feed lubricants, usually lubricating grease, under moderate to high pressure, into a bearing
  • Made from EN-1A steel/ 303 Stainless Steel/Brass and supplied as per requirement.
  • Quality compliance to ISO/TS-16949.
  • Case Hardened Head with a case depth of 0.005″ (0.13 mm) to 0.009″ (0.23 mm) only for extra durability and to protect them from wear due to constant use.
  • Ball check in the head prevents dirt and grit from getting into the fitting.
  • Heavier wall thickness for extra strength
  • Stress Relieved and Tempered Carbon Steel Spring.
  • Zinc Plated with Yellow Passivated finish with a plating thickness of 0.0002″ (5 microns) confirming to SAE J534 specification & have a guaranteed salt spray life of over 72 hours to red rust. Fittings can be custom manufactured in white zinc & also be made with trivalent passivation for maximum protection against corrosion.
  • Fitting profile & dimensions are comply to SAE, DIN, BS, JIS & IS standards.

grease-fitting

Ordering Details

Article No.

Order No.

Description

Specifications

Overall Length (A)

Shank Length (B)

Effective Thread Length Minimum (C )

Hex Size (H)

Button Head Grease Fitting – Parallel Threads
SA/GF-BH/1

320034

 1/4″ x 19 BSPF

 21.0 mm

 10.7 mm

 7.0 mm min

 15.24 mm

SA/GF-BH/2

320035

 1/8″ x 28 BSPF

 15.3 mm

 7.4 mm

 4.0 mm min

 15.24 mm

Button Head Grease Fitting – Taper Threads
SA/GF-BH/3

320036

 1/8″ – 27 PTF SAE spl. Short

 19.0 mm

 8.7 mm

 4.76 mm min

 5/8″

SA/GF-BH/4

320037

 3/8″ – 18 NPTF

 24.2 mm

 12.3 mm

 9.5 mm min

 3/4″

SA/GF-BH/5

320038

 1/4″ – 18 NPTF

 21.0 mm

 10.7 mm

 6.75 mm min

 5/8″

Applications

application

Downloads


error: Content is protected !!