Product Construction
- Hardened Tool Steel
- Auto Black & Ground Finish
Product Features
- Automatic center punches are used to mark hole locations for starting drill, screws and layout work. This spring loaded center punch is adjustable for light to heavy punch marks. Striking force can be regulates from higher to lower by simply rotate the cap, rotate the cap clockwise or anticlockwise to adjust striking force and press the point down.
An internal, spring-loaded hammer center punches the metal, placing a small dimple in the surface. Especially useful when working in locations where you do not have room to swing a hammer - Features a heat-treated alloy steel punch with a sharp precision tip and a steel body with non-slip knurled grip
- One hand operation makes this center punch a valued addition to any tool box
Ordering Details
Article No. |
Order No. |
Body Material |
Body Diameter |
Total Length |
||
Inch |
mm |
Inch |
mm |
|||
SA/ACP/1 |
260189 |
Steel |
1/2 |
13 |
4-3/4 |
120 |
SA/ACP/2 |
260190 |
Alumininum |
37/64 |
14.5 |
4-3/4 |
128 |
Note: Available in customize sets as per requirement.
Applications
