Product Construction
- EN-1A steel/Stainless Steel/Brass
- Heat Treated
- Zinc Plated
Product Features
- A metal fitting used in mechanical systems to feed lubricants, usually lubricating grease, under moderate to high pressure, into a bearing
- Made from EN-1A steel/ 303 Stainless Steel/Brass and supplied as per requirement.
- Quality compliance to ISO/TS-16949.
- Case Hardened Head with a case depth of 0.005″ (0.13 mm) to 0.009″ (0.23 mm) only for extra durability and to protect them from wear due to constant use.
- Ball check in the head prevents dirt and grit from getting into the fitting.
- Heavier wall thickness for extra strength
- Premium grade 3 Music Wire ensures accurate opening.
- Zinc Plated with Yellow Passivated finish with a plating thickness of 0.0002″ (5 microns) Exceed to ASTM B117 specification & have a guaranteed salt spray life of over 72 hours to red rust. Fittings can be custom manufactured in white zinc & also be made with trivalent passivation for maximum protection against corrosion.
- Fitting profile & dimensions are comply to SAE, DIN, BS, JIS & IS standards.
Ordering Details
|
Article No. |
Order No. |
Angle (A) |
Specifications |
|||
|
Effective Thread Length |
Shank Length (C) |
Overall Length (E) |
Hex Size(D) |
|||
|
1/4" – 28 SAE-LT – Taper Thread |
||||||
|
SA/GF-90/1 |
320019 |
90° |
2.5 mm min. |
5.1 mm |
19.3 mm |
3/8" |
|
1/4" – 28 Spl. Self Forming Threads |
||||||
|
SA/GF-90/2 |
320020 |
90° |
2.5 mm min. |
4.8 mm |
19.3 mm |
3/8" |
|
1/8" x 28 BSPT – Taper Threads |
||||||
|
SA/GF-90/3 |
320021 |
90° |
3.75 mm |
5.5 mm |
18.0 mm |
11.0 mm |
|
SA/GF-90/4 |
320022 |
90° |
6.5 mm |
8.0 mm |
21.4 mm |
11.0 mm |
|
1/4" x 19 BSPT – Taper Threads |
||||||
|
SA/GF-90/5 |
320023 |
90° |
4.2 mm |
6.5 mm |
22.0 mm |
9/16" or 14 mm |
|
1/8" – 27 Pipe Threads PTF – Special Short |
||||||
|
SA/GF-90/6 |
320024 |
90° |
5.6 mm |
7.6 mm |
21.3 mm |
7/16" |
|
1/8" – 27 Spl. Self Forming Threads |
||||||
|
SA/GF-90/7 |
320025 |
90° |
2.8 mm |
5.1 mm |
19.3 mm |
7/16" |
|
1/4" – 18 Pipe Threads – Special Extra Short |
||||||
|
SA/GF-90/8 |
320026 |
90° |
5.75 mm |
9.27 mm |
24.0 mm |
9/16" |
|
6.0 mm x 1.0 mm Taper Threads |
||||||
|
SA/GF-90/9 |
320027 |
90° |
4.5 mm |
5.5 mm |
18.0 mm |
9.0 mm |
|
8.0 mm x 1.0 mm Taper Threads |
||||||
|
SA/GF-90/10 |
320028 |
90° |
3.75 mm |
5.5 mm |
18.0 mm |
9.0 mm |
|
8.0 mm x 1.25 mm Taper Threads |
||||||
|
SA/GF-90/11 |
320020 |
90° |
3.7 mm |
5.5 mm |
18.0 mm |
9.0 mm |
|
10.0 mm x 1 mm Taper Threads |
||||||
|
SA/GF-90/12 |
320030 |
90° |
3.75 mm |
5.5 mm |
18.0 mm |
11.0 mm |
|
10.0 mm x 1.5 mm Taper Threads |
||||||
|
SA/GF-90/13 |
320031 |
90° |
3.75 mm |
5.5 mm |
18.0 mm |
11.0 mm |
|
Stainless Steel Grease Fittings |
||||||
|
SA/GF-SS90/1 |
320032 |
90°, 1/4" – 28 SAE LT |
2.5 mm |
5.1 mm |
19.3 mm |
3/8" |
|
SA/GF-SS90/2 |
320033 |
90°, 1/8" – 27 PTF |
5.6 mm |
7.6 mm |
21.3 mm |
7/16" |
Applications
