Product Construction
- EN-1A steel/Stainless Steel/Brass
- Heat Treated
- Zinc Plated
Product Features
- A metal grease fitting/grease nipple/zerk fittings used in mechanical systems to feed lubricants, usually lubricating grease under moderate to high pressure into a moving parts
- Made from EN-1A steel/ 303 Stainless Steel/Brass and supplied as per requirement.
- Quality compliance to ISO/TS-16949
- Case Hardened Head with a case depth of 0.005″ (0.13 mm) to 0.009″ (0.23 mm) only for extra durability and to protect them from wear due to constant use.
- Ball check in the head prevents dirt and grit from getting into the fitting
- Heavier wall thickness for extra strength
- Premium grade 3 Music Wire ensures accurate opening
- Zinc Plated with Yellow Passivated finish with a plating thickness of 0.0002″ (5 microns) Exceed to ASTM B117 specification & have a guaranteed salt spray life of over 72 hours to red rust. Fittings can be custom manufactured in white zinc & also be made with trivalent passivation for maximum protection against corrosion
- Fitting profile & dimensions are comply to SAE, DIN, BS, JIS & IS standards
Ordering Details
|
Article No. |
Order No. |
Angle |
Specifications |
|||
|
Effective Thread Length |
Shank Length (C) |
Overall Length (E) |
Hex Size (D) |
|||
|
1/4″ – 28 SAE-LT – Taper Thread |
||||||
|
SA/GF-45/1 |
320001 |
45° |
2.5 mm |
5.1 mm |
20.8 mm |
3/8″ |
|
1/4″ – 28 Spl. Self Forming Threads |
||||||
|
SA/GF-45/2 |
320002 |
45° |
2.5 mm |
4.8 mm |
20.3 mm |
3/8″ |
| 1/8″ x 28 BSPT – Taper Threads | ||||||
|
SA/GF-45/3 |
320003 |
45° |
3.75 mm |
5.5 mm |
21.0 mm max. |
11.0 mm |
|
SA/GF-45/4 |
320004 |
45° |
6.5 mm |
8.0 mm |
26.3 mm |
11.0 mm |
|
1/4″ x 19 BSPT – Taper Threads |
||||||
|
SA/GF-45/5 |
320005 |
45° |
4.2 mm |
6.5 mm |
22.5 mm |
9/16″ or 14 mm |
|
1/8″ – 27 Pipe Threads PTF – Special Short |
||||||
|
SA/GF-45/6 |
320006 |
45° |
5.6 mm |
7.6 mm |
21.8 mm |
7/16″ |
|
1/8″ – 27 Spl. Self Forming Threads |
||||||
|
SA/GF-45/7 |
320007 |
45° |
2.8 mm |
5.1 mm |
19.8 mm |
7/16″ |
|
1/4″ – 18 Pipe Threads – Special Extra Short |
||||||
|
SA/GF-45/8 |
320008 |
45° |
5.75 mm |
9.27 mm |
29.74 mm |
9/16″ |
|
6.0 mm x 1.0 mm Taper Threads |
||||||
|
SA/GF-45/9 |
320009 |
45° |
4.5 mm |
5.5 mm |
21.0 mm |
9.0 mm |
|
8.0 mm x 1.0 mm Taper Threads |
||||||
|
SA/GF-45/10 |
320010 |
45° |
3.75 mm |
5.5 mm |
21.0 mm |
9.0 mm |
|
8.0 mm x 1.25 mm Taper Threads |
||||||
|
SA/GF-45/11 |
320011 |
45° |
3.7 mm |
5.5 mm |
21.0 mm |
9.0 mm |
|
10.0 mm x 1 mm Taper Threads |
||||||
|
SA/GF-45/12 |
320012 |
45° |
3.75 mm |
5.5 mm |
21.0 mm |
11.0 mm |
|
10.0 mm x 1.5 mm Taper Threads |
||||||
|
SA/GF-45/13 |
320013 |
45° |
3.75 mm |
5.5 mm |
21.0 mm |
11.0 mm |
|
Stainless Steel Grease Fittings |
||||||
|
SA/GF-45SS/1 |
320014 |
45°, 1/4″ – 28 SAE LT |
2.5 mm |
5.1 mm |
20.8 mm |
3/8″ |
|
SA/GF-45SS/2 |
320015 |
45°, 1/8″ – 27 PTF |
5.6 mm |
7.6 mm |
21.8 mm |
7/16″ |
Applications
